BFT200D

The 200 hp powerful four stroke, the BFT200D, brings a large displacement 3.6 liter V6. This narrow V6 design offers top performance and durability, as well as great fuel economy. The high output alternator provides a 90 amp alternator with 60 charging amps.

The new BFT200D provides a broader torque range and smoother power throughout the engine’s operating range. With an innovated exterior, the improvement of corrosion resistance and water intrusion makes BFT200D the right choice.
 
Tohatsu 200 hp 4-Stroke Benefits
High output alternator that produces 90 amp alternator with 60 charging amps
Large Displacement 3.6 Litre V6
Available in 20" & 25" shaft lengths. Standard and Counter rotation
Double sealed multi-layered paint process to help protect against corrosion
Semi direct air intake system
Enhanced sealing system by adopting three new large locks
4-Stroke Technology
Lean burn control for better fuel economy at cruising speeds
Maximum Acceleration System helps to deliver an exceptional hole shot
Variable valve timing and lift control
3-Way Cooling System to help protect against overheating
Heavy duty 5" diameter gear case built to withstand extreme conditions
Non-linear rubber mounts provide smoother operation at all engine speeds
A crankshaft-driven trochoid oil pump ensures long-term durability of critical engine components
Optimized Fuel Injection delivers the precise amount of fuel/air to each cylinder
Fundamentals for User Convenience and Reliability
Through the prop exhaust for a quieter ride
Built-in freshwater flushing system for easy routine flushing
Separate dual air intake cowling design to help keep your engine's critical components cool
Sealed starter motor that is inverted into a sealed chamber to help protect vital components against elements
Electronic Control Module protocols allow engine data to be interfaced with on-board systems and systems displays, such as SONAR or GPS
Warning & Protection
Low oil pressure warning
Overheat warning
Low battery voltage warning
Water in fuel warning
Start-in-gear protection
Over-rev. limiter
SPECIFICATIONS
Engine
6 Cylinder SOHC, 60 degrees V6, 24 Valve
Output
200 ps (147.1 kw)
Displacement
3,583 cc (218.6 cu.in.)
Bore x Stroke
89 x 96 mm (3.5 x 3.8 in)
Max. RPM Range
5,000 - 6,000
Starting
Electric
Control Type
Remote Control
Gear Shift
Forward - Neutral - Reverse
Gear Ratio
2.0:1 (12:24)
Ignition System
MicroComputer Programmed
Propeller Selection Range
15" - 27"
Transom Height
20", 25"
Fuel
Unleaded Gasoline (87 Octane) or higher
Oil Type
NMMA Certified FC-W® 4-stroke oil** SAE 10W-30 (SF, SG, SH, SJ)
Oil Capacity
7.8L (2.1 US Gal.) w/filter
Weight*
279 kg (615 lbs.)
Alternator Output
12V, 1080W, 90A
Programmed Fuel Injection
Standard
Start In Gear Protection
Standard
Thermostat Controlled Cooling System
Standard
Through-The-Prop Exhaust
Standard
Overheat Buzzer
Standard
Oil Pressure Warning
Standard
Power Trim and Tilt
Standard
Variable Valve Timing & Lift Control
Standard
* Weight specification is based on the lightest version.
** FC-W® is a registered trademark of the National Marine Manufacturers Assoc. (NMMA)
Specifications and descriptions are subject to change without notice.
Model
Shaft Length
Cylinders
Electric Start
Remote Control
12V Charging
System
Power
Trim &Tilt
Counter Rotation
BFT200DLRU
20
6
S
S
S
S
 
BFT250DXRU
25"
6
S
S
S
S
 
BFT250DXCRU
25"
6
S
S
S
S
S
S:Starndard
Specifications subject to change without notice. Additional models and/or configurations may be available. Contact your local dealer for details.